Loud pipes are pretty annoying, and they can really change the mood on the peaceful atmosphere of your home. You need to be able to find out what generally causes pipes to make these loud, offensive noises and what can be done about it.
Copper Pipes
Most experienced Plumbers In Long Beach CA will tell you that copper pipes are known for creating noise. As hot water moves through the colder pipes, the material typically expands. As a result, this can cause it to make contact with a structure close by, such as the home’s framing or wood floor. When the water moves out of the pipe, the pipe will contract back to its usual shape and stop rubbing against the other surface. Then, the noise suddenly stops.
To eliminate or help reduce copper pipes from making such noises, it’s possible to install insulation around them to limit the expanding and contracting. Furthermore, most Long Beach Plumbers say it may help to lower the setting on your water heater so that water moving through pipes isn’t quite as hot.
Minerals in Your Water
Water is abundant with minerals that can get left behind in the pipes. Essentially, these minerals create a coating on the walls of the pipes and cause air bubbles to develop. As warm water moves through the pipes or as the water inside the pipes becomes warm, the bubbles pop and make noise.
If mineral buildup is the reason why, flushing out the water heater should assist in the process. Flushing is part of annual service a water heater technician provides. Scheduling annual tuneups for the water heater helps it operate the right way and aids in removing buildup that can harm not just the pipes but the system, too.
Loose Pipes
If pipes are loosely secured to surfaces in the home, they can vibrate as water moving through them creates pressure. Our Long Beach Plumbers say that if the problem is as simple as loose connections causing vibrating pipes, tightening these connections should remedy the loud pipes.
Water Hammer
Most Long Beach Plumbers will tell you that water hammer creates a clanging or banging noise, which results from a closed valve stopping the force of water flow. At times, stopping water hammer is as simple as slowly turning water on and off to offset the strong force of water causing the banging noise. Nonetheless, you may need a local Long Beach Plumber to install control valves to absorb the strong force of water when it stops.