Plumbing inside your walls should never really be rattling. Banging and rattling noises are often referred to as “water hammer”, which generally causes the pipes to make noise.

Water moving through your plumbing can create a vacuum like effect as a consequence. It is usually taken care of using a port that finishes up across the roof near your faucet or plumbing fixture. But if the port is blocked, then this can develop and it’ll create the hammering noise as a result.

Main Line Issues

Our Long Beach Plumbers typically suggest if this is the case, that you shut off your main water supply.

Turn to the maximum faucet in your house (the one that’s the farthest upstairs and furthest away from your main water source ).

Flip around the floor faucet at the house (the one at the basement, outside, or located from the first floor nearest into the main sewer line). Eventually the water may drain and stop flowing.

Switch off the exact minimal faucet, change on your main valve, and allow water to re-fill your plumbing before it’s freely flowing through your faucet again.

Water Pressure

Additionally,, a significant amount of water pressure is also a cause of loud banging and rattling noises from the plumbing pipes. If you are hearing this noise when turning a faucet or off, this is probably the issue.

If this happens to be the case, you need to contact your local Long Beach Plumbing expert and ask about installing a pressure regulator or decrease valve. This can give water a chance to flow through your home at a more reasonable speed, and it is also easier for the overall plumbing and water-supplied appliances.