It can be frustrating and difficult for homeowners to repair damaged sewer lines. Sewage backups, unpleasant odors and health hazards can make this a serious problem that needs to be dealt with immediately. The good news is there are many ways to repair and replace damaged sewer lines depending on the severity of the damage. We will be providing a detailed guide for repairing or replacing damaged sewer pipes in this blog post.

Identify the Problem

The first step in replacing or repairing damaged sewer lines is to recognize the problem. A damaged sewer line may not be obvious but can cause subtle or severe damage. It is important to recognize the problem early in order to prevent further damage. Slow draining or clogged sewers, sewage backups and soggy spots in your yard are all signs of a damaged line.

Locate the Sewer Line

After identifying the problem, you need to locate the sewer line. The sewer line is buried underground, connecting your home to the mains sewer system. The clean-out point is a small, white pipe with a cap located near your house or in your yard. To locate the clean out access point, call your local utility company.

Assess the Damage

The next step after locating the sewer line is to assess the damage. The extent of damage will determine the best way to repair or replace the sewer line. The most common damage is corrosion, tree root penetration, cracks and collapsed pipes. Most cracks and breaks can usually be repaired with epoxy, cured-in place pipe lining or other methods. Larger damage may require excavation and replacement.

Choose between the repair or replacement method

There are many methods to repair or replace damaged sewer pipes. It all depends on how severe the damage is. The following are some common methods:

• Epoxy lining is the process of coating the inside the damaged pipe with epoxy in order to seal cracks and prevent any leaks.
• Cured in-place pipe Lining: This is a method that involves inserting flexible liners into damaged pipes and curing them with heat or UV light.
• Pipe burst is a method that involves the breaking up of damaged pipes and then putting in a new pipe.
• Excavation & replacement: This involves digging up the pipe damaged and replacing it with a brand new one.

A professional can be hired

The task of replacing or repairing damaged sewer lines is not something you can do yourself. To ensure the job is done safely and correctly, it requires special equipment, expertise, as well as experience. It is best to hire a licensed plumber who is insured.

Prevent Future Damage

It’s important to take steps to prevent further damage after you have repaired or replaced your sewer line. These are some ways to avoid future damage.

• Do not flush anything else than toilet paper down your toilet.
• Avoid putting grease, oil, or any other liquids down the toilet.
• A licensed plumber should inspect your sewer line on a regular basis.
• Plant trees and shrubs in the vicinity of your sewer line.
• Do not drive on your lawn or park there as it can cause damage to the sewer line.

Although it can be complicated and difficult to repair or replace sewer lines that are damaged, it is vital to do so quickly to prevent more damage and other health hazards. It is crucial to identify the problem, locate the sewer line and assess the damage. Then, hire a professional. A licensed plumber professional can help you replace or repair your damaged pipe.