Fixing small problems like leaking faucets and overflowing toilets can help you save money. These six tips can quickly solve your plumbing problems. You will need to have basic skills and the right tools for each job.

Don’t be afraid to replace the inside of toilets and faucets

You can make a mess by removing fittings or pipes from under the sink, shower or bathtub. Toilet leaks are usually caused by worn flappers. Most faucets can be replaced with a new cartridge. You can replace parts if your toilet leaks or runs frequently.

Drains can be unclogged without using chemicals

If your drain is slow, you don’t need to spend a lot of money on chemicals. To clear the drain, the plumber’s snake will be used to insert it into the obstruction.

If you have any questions, please check the shower head

You can use thread tape to repair a dripping or sagging shower-head. This is usually due to loose thread connections. Unscrew the shower head that is leaking, and wrap thread tape clockwise around the shower head to stop the drip.

Warm water and vinegar can be used to loosen clogged shower heads for up to an hour. To loosen mineral deposits, brush the shower-head with a toothbrush.

Avoid using thread sealant chemicals. Use thread tape instead.

Thread sealants or pipe dope may smear or drip over time. Thread tape is an excellent choice for DIY plumbing projects that use pipe threads.

Multipurpose thread tape (the one that comes in white) is an option. Yellow and pink tapes are thicker and more flexible. Wrap the tape counterclockwise around pipe threads. To get the best results, wrap the tape at least three times.

Pipe fittings that are heat-resistant can be removed

Do not lose heart if you can’t loosen a pipe joint or other plumbing fitting even with your pipe wrench. You can heat to loosen solidified sealants. Only heat metallic water pipes and fittings.

Increase efficiency of your water heating system

You need to make sure that the thermostat of your water heater does not exceed the maximum setting. The temperature can be adjusted to 115 degrees.

This insulation will also help to insulate the water heater tank. You can find many affordable insulation products that are easy to install. If you live in an area that is prone to sediment buildup, it will be necessary to remove the sediment regularly. You can remove the sediment by draining about a quarter of your hot water tank each three months.

Put a bucket or bowl near the tank opening. Let the water heat up in the tank. This will remove most of the sediment and minerals that have accumulated in your tank. Sediment accumulation can affect the efficiency of your water heater.

It’s possible to trust professionals to fix difficult plumbing problems. In case of an emergency, it is important to keep the contact information for your Long Beach plumber on hand. Many plumbing issues can be fixed by you.